• Mono: New back side achieves best values of 18.6 percent
• Values significantly exceed the current industrial average

centrotherm photovoltaics AG is reporting an additional milestone achievement of its solar cell division. Once again documenting the strong performance of its in-house research and development, average efficiencies of 17.1 percent have now been achieved on high-quality, multi-crystalline customer material. The reference surface area of the related wafers is 156 times 156 mm². Consequently, all values significantly exceed the current industrial average of around 15.7 percent. With these results, the photovoltaic specialists from Blaubeuren demonstrate the great potential inherent in the selective emitter technology in the multi-crystalline area. centrotherm photovoltaics already guarantees production efficiencies of 16.6 percent for the mass production of multi-crystalline cells using the "FlexLine Plus" turnkey production line presented in March 2009. The efficiency enhancements achieved are the result of the newly developed cell front side based on selective emitter technology. First production lines with selective emitter technology have been sold to Asia.
Selective emitter technology
The emitter coating is the uppermost coating of a solar cell exposed to light. Conventional emitters exhibit a high phosphorus concentration. As a consequence, most of the light that the emitter absorbs is converted into heat, and cannot contribute to electricity generation within the solar cell. The selective emitter technology significantly diminishes this absorption loss applying a high phosphorus concentration only to a partial area where it is essential. This enlarges the effective cell area that can absorb light, and convert it into electricity.
Research and development results available as upgrade for existing customers
centrotherm photovoltaics is directly passing on the achieved development progress to customers in the form of upgrade options for existing turnkey production lines: the company is thereby optimizing standard processes that have been available on the market to date, which employ homogeneous emitters. At the same time, innovative production processes such as the selective emitter technology are being developed in such a way that they can be integrated and retrofitted into existing process flows.
centrotherm photovoltaics is pursuing a research and development roadmap that envisages an annual efficiency enhancement of 0.5 percent in the mono- and 0.4 percent in the multi-crystalline cell areas. "An efficiency enhancement of 0.5 percent allows production costs to be cut by around 3 percent," was how Dr. Peter Fath, CTO of centrotherm photovoltaics, summed up the significance of this goal. "This allows us to continuously realize cost-saving potentials for our customers that strengthen their competitiveness."

New back side achieves best values of 18.6 percent without selective emitter (mono)
Following the optimization of the cell front side based on selective emitter technology, the company’s continued roadmap aims to restructure the cell back side as part of the next step. Already in the initial process runs for the new cell back side, the centrotherm photovoltaics research and development team has achieved best values of 18.6 percent on a mono-crystalline material. The company anticipates that significantly higher results can be attained in combination with the selective emitter technology on the cell front side. "Using selective emitters and further retrofitting packages, we are achieving efficiency enhancements for crystalline solar cells that hold potential for the mass production of high-efficiency cells," Dr. Fath went on to comment. "We are already significantly ahead of our roadmap objectives for 2009."

Popularity: 1%

1. Breakthrough Pluto Technology Developed by Suntech Achieves Efficiencies of 19% on Mono- crystalline PV Cells and 17% on Multi-crystalline PV Cells in Production

     –Conversion Efficiencies Independently Verified by the Fraunhofer Institute SAN FRANCISCO and WUXI, China, March 27, 2009 /PRNewswire-Asia via COMTEX/ — Suntech Power Holdings Co., Ltd. (NYSE: STP), the...

2. Research and Development Remains a Central Topic for centrotherm photovoltaics

   centrotherm photovoltaics raises revenue and earnings in the first nine months of 2009 and confirms full-year guidance Revenue up by 58.1 percent to EUR 374.7 million EBITDA leaps 62.3...

3. Suntech with World Record Conversion Efficiency for a Multi-Crystalline Module

   Suntech Power Holdings Co., Ltd. (NYSE: STP), has announced today (19.08.2009) that it has achieved a new world record conversion efficiency of 15.6% on a commercial grade multi-crystalline silicon PV...

4. World Record for Multi-Crystalline Module Conversion Efficiency – Suntech with Another Breakthrough

   HAMBURG, Germany and WUXI, China, Sept. 23 – Suntech Power Holdings Co., Ltd. (NYSE: STP), the world’s leading manufacturer of crystalline silicon photovoltaic (PV) modules, has announced today that it...