Berlin, March 2, 2010 – SOLON SE will be introducing its module specially developed for use on lightweight industrial metal roofs at the 25th Symposium on Photovoltaic Solar Energy in Bad Staffelstein, Germany, on March 3-5. The frameless design of the SOLON Black 280/12 module is attached directly to the roof using a silicone-based adhesive, without any roof penetration. This way, there is usually no need for an assembly system. Assembly time is substantially less when compared to a conventional solar power system using crystalline modules because fewer components are required, the system is lighter weight, and installation is uncomplicated when using an adhesive. SOLON is thus bringing to market the first roof system using adhesive bonding and working with powerful crystalline modules.
Many owners of flat metal roofs were unable to use these surfaces for photovoltaic systems due to load-bearing restrictions of the roofs for a conventional system. As well, owners were concerned about leaks once the mounting system was installed. The SOLON Black 280/12 is manufactured using 72 monocrystalline cells and weighs only 8.5 kg/m², making it extremely lightweight. This feat is made possible by eliminating the frame and using 3.2 mm of glass. The connection socket is rotated by 180 degrees to facilitate assembly and improve cable routing. The modules are particularly well-protected against theft since they are attached with an adhesive. It also is protected against corrosion with other foreign materials on the roofs.
Sika Deutschland GmbH, a leading global manufacturer of specialty chemicals for construction and industrial materials for sealing and adhesive bonding, produces the adhesive for the solar power systems for metal roofs. The system consisting of module and adhesive comes with a 20-year warranty.
The SOLON Black 280/12 measures 1937 x 993 mm and attains a maximum peak power of 270 watts, which is the equivalent to an efficiency of 14 percent. The output is thus two times higher per square meter when compared to other thin-film systems on the market
Related Posts:
- First Large-scale power plant with adhesive PV system based on crystalline modules: SOLON provides 4 MWp for roof-mounted project in Italy
As of the end of January, SOLON SE delivers crystalline modules for a roof-mounted solar power plant with a...
- SOLON Black 160/05 – The new in-roof module
Fast installation, appealing design: The new in-roof module SOLON Black 160/05 Berlin, February 25, 2009 – SOLON is introducing a...
- Innovation Prize for SOLON Black 160/05 In-Roof Module
Berlin, Mach 9, 2009. The SOLON Black 160/05 in-roof module has been awarded the Innovation Prize of the 24th Photovoltaic...
- SOLON Connects the First 3 MW of the Solar Power Plant on the Roofs of the Logistics Center of Interporto Padova to the Grid
The first three megawatts (MWp) of the large solar power plant on the roofs of the logistics center of...
Solar Energy | admin | March 3, 2010 
The new inroof system isn’t new since this has been done two years ago by SOLAR PROFIL FRANCE only with glass and a strong adhesive.